• 1300 988 1818
• 12 Locations across Sydney and NSW
• Approved RTO 41072

What Our Customers Say Across NSW

NSW White Card Course Information

• What is a White Card course in New South Wales?

  In New South Wales, the White Card course must be completed face-to-face or in a virtual live classroom with an approved trainer. It cannot be completed online or self-paced. After successfully finishing the course, participants receive a SafeWork NSW White Card, which is a government-issued construction induction card required to legally work on any construction site in NSW.

  Although it’s issued in NSW, your White Card is valid across Australia, so you don’t need to complete the course again if you move interstate.

• How long is the NSW White Card valid for?

  Your card doesn’t have an expiration date, but if you haven’t been on a construction site for 2+ years, the government suggests taking a course to update your skills and get back up to speed.

• What is the difference between a White Card and a Green Card in Australia?

  If you completed your workplace safety induction before the law changed, you were certified with a “green card”. Now, you get a “white card” after finishing the same course. It’s the same certification, just a different name and colour. Green is the old version, white is the current card.

• What is the 100 points of ID I need to bring with me?

  If you are doing the White Card in NSW you are required to provide 100 points of ID. All documents must be original and issued in Australia. (Your passport may be from overseas.) Digital licences (e.g. Service NSW app) are accepted. If you are new to the country (been here less than 6 weeks) or a high school student, please scroll down as you are exempt from the 100 points

  Document	Points
  Australian or international passport	70
  Birth certificate	70
  Citizenship certificate	70
  Driver’s licence	40
  Photo card	40
  Boat licence	40
  NSW high-risk work licence	40
  Gun licence	40
  Bank card (per bank, two different)	25
  Medicare card	25
  Electricity bill	25
  Car registration papers	25
  Centrelink concession card	25
  Phone bill	25

  ImmiCards CAN NOT be used unless they are approved by Safework NSW directly. Please email us 48 hours in advance of your course if you seek approval to use an ImmiCard.

   

  Note: You must include at least one photo ID (e.g. passport, driver’s licence, photo card) your address, signature and address across the IDs used.

  ---

  Who’s Exempt from 100-Point ID?

  You do not need to present 100 points of ID if you fall into any of these categories:

  • New arrivals (in Australia for less than six weeks)

  • Current high school students

  • Aboriginal or Torres Strait Islander

  Exemptions in Detail

  1. New Arrivals (Less Than 6 Weeks)

  Bring:

  • Passport or visa

  • Bank card or driver’s licence from your home country

  2. Current High School Students

  Bring either:

  • Your school ID

  • One of: driver’s licence, birth certificate, passport, or citizenship certificate with evidence you are in school. You must show the trainer you are still enrolled. This could be by logging in to your school portal. If you are unable to provide evidence you are in school, you need to provide 100 points.

  3. Aboriginal or Torres Strait Islander Applicants

  If you lack sufficient ID, provide two official references from recognised agencies.

  For further assistance, please contact us at admin@nwcc.edu.au or 1300 988 181.

• Who can enrol in a White Card course in NSW?

  Anyone aged 14 years or older can enrol in White Card training in New South Wales.

  There are no formal qualifications required.

  However, participants must have a basic level of English reading, writing, and verbal communication to understand safety concepts and complete assessment tasks.

  White Card training is suitable for school leavers, job seekers, tradespeople, apprentices, and anyone preparing to enter the construction industry or other high-risk work environments.

• Can international students or visa holders get a NSW White Card?

  Yes. International students and temporary visa holders — including those on Student, Working Holiday, or Skilled Work visas — are eligible to complete White Card training in NSW.

  You’ll need to provide valid photo ID and meet SafeWork NSW’s 100 points of identification requirement (listed above).

  Once issued, your White Card is valid throughout Australia.

• Is White Card training course mandatory in NSW?

  Yes. White Card training is legally required under SafeWork NSW regulations for anyone who carries out construction work or needs to access an operational construction site.

   

  This includes labourers, apprentices, tradies, site supervisors, engineers, delivery drivers, and even office staff who visit live construction zones.

   

  Without a valid White Card, you cannot legally enter or work on these sites in NSW.

• Can I complete my White Card training online in NSW?

  Yes. But it is in a live vitual classroom. It is no possible to do the white card online at your own pace. This is only possible in Tasmania and Western Australia.

  We offer online instructor-led White Card training in NSW, which is fully approved by SafeWork NSW.

  This delivery method involves a live virtual classroom where you interact with your trainer in real time.

  You’ll complete the same accredited course as in-person participants — just from the comfort of your own home or workplace.

  A working webcam, microphone, and reliable internet connection are required as well as the 4 items of PPE.

  Only people that require no support are eligible to do the course this way. If you feel you may require support in the class, you should attend one of our 12 face to face locations across NSW.

• How do I book a White Card course in NSW?

   

  Pick your location and a date that works for you. Click enroll, fill in your details, and pay. You’ll get a confirmation email with your course date, venue, and what to bring. Show up with your ID and complete the course. Make sure you’ve got your USI (Unique Student Identifier) ready before you start.

  Need a USI? Go to usi.gov.au and click “Get a USI”.

  Can’t remember it? Use the “Find my USI“ tool on the same site.

  They are easy to get, it only takes a few minutes. Once you get one its yours for life and you don’t need to get one again.

• Can I get RPL for this course?

  We do not offer RPL for any white card courses in Australia due to state regulations. You must attend the white card course to get a white card.

• Language, Literacy and Numeracy Requirements

  To successfully complete the White Card course (CPCWHS1001 – Prepare to work safely in the construction industry), all students must have a basic level of English language, literacy and numeracy. This ensures you can understand safety information and participate safely in the training.

  You need to read simple safety signs and instructions, fill out forms, and communicate clearly in English with your trainer and classmates. You’ll also follow spoken instructions and understand basic numbers like times and measurements.

  Support

  If you require LLN assistance, please let us know before booking. We may be able to offer support, make reasonable adjustments, or recommend alternative options.